Skip to content
Search

Landlink

lastmod 2026-11-16created 2026-11-162 edits

Landlink is an open-source off-grid communication project that lets phones exchange messages over LoRa radio where there is no internet or cellular network. Flash the firmware onto an ESP32-family LoRa board and connect it to the phone app over BLE, and the boards form a mesh network that relays messages for each other. Long-range text goes over LoRa, while photos and videos between nearby nodes go over an ESP-NOW-based Wi-Fi mesh.

About

  • The firmware targets ESP32 and ESP32-S3 boards with an SX1262 LoRa chip. It exchanges pairing, Wi-Fi settings, and radio settings with the phone over BLE GATT, discovers nearby nodes over LoRa, and forms a mesh using managed flooding
  • The radio layer is aligned with Meshtastic. RadioLib is pinned to the same commit as Meshtastic's stock firmware, and it follows the same hardware model numbers and PKI shared-secret scheme so it can communicate with existing Meshtastic nodes and repeaters
  • LoRa frames are encrypted with AES-CCM. DMs get end-to-end delivery acknowledgments; broadcasts are considered delivered when a relay node's retransmission is heard
  • The Wi-Fi mesh (ESP-NOW, 6Mbps) is off by default and enabled per device. Photos and videos up to 900KiB travel only 1 hop, while text is relayed up to 3 hops. Uses NACK retransmission in 64-chunk units and SHA-256 verification, and frames are encrypted with AES-256-CCM
  • Wi-Fi reception draws 80–100mA, far more power than LoRa reception at a few mA
  • Firmware is flashed with the web flasher at landlink.sh; later updates arrive as A/B-partition OTA over BLE. According to the README, ed25519 signature verification is still in progress
  • Supported boards: LILYGO T-Beam V1.1 (default), T-Beam Supreme, T3-S3, Heltec WiFi LoRa 32 V3/V4, Heltec Wireless Tracker V1.1, and Seeed XIAO ESP32S3 + Wio-SX1262. T-Beam Supreme, T3-S3, and the Heltec boards have only been verified to build
  • Uses C++17, PlatformIO (Arduino), NimBLE, and RadioLib. A single protocol.yaml generates both the C++ headers for the firmware and the TypeScript types for the app
  • As of firmware v0.4.0. The phone app is on the iOS App Store. Apache-2.0 license

See also

Favorite site

author Zer0, MCPBot sitemap